Christie Mirage WQ-L Manual do Utilizador descarregar pdf (Página 39)

Operation

Mirage WQ-L User Manual 39

020-101372-02 Rev. 1 (10-2014)

Enter

Press Enter to select a highlighted item, to toggle a check box, or to accept a parameter

adjustment and return to the previous menu or image.

Exit

Press Exit to return to the previous menu.

Laser

Press the Laser button to activate the laser pointer on the remote.

Select Inputs

An input is an input source physically connected to the projector. Input describes the source signal

to which it is connected. For a full explanation of how to connect sources to the projector, see

Connect a Source on page 18.

1. From the Main menu, select Input & Switching.

2. From the Main Input drop-down menu specify the source of the image. Select from Input 1

and Input 2.

3. If the projector(s) are to operate with InfraScene, the source of the image for the secondary

input must be specified through the Secondary Input drop-down menu.

4. Frame Locking is enabled by default. This feature is used to select how the projector controls

the output frame timing based on the input signal. When set to Frame Lock, output image

frames are locked to the input if possible. When locked, the output is always locked to the main

input. When working with two inputs you can select input 2 as the lock source for the output by

selecting Frame Lock Secondary. See Control Frame Locking on page 47.

ArrayLOC

Mirage WQ-L projectors use ArrayLOC to display a common gamut and brightness across an array of

projectors. ArrayLOC monitors the projector array and adjusts settings automatically. The following

section outlines how to manage color using ArrayLOC.

You can use the IR remote to setup your inputs; however, Christie recommends that inputs

are setup through the WebUI.

• To quickly and easily swap your inputs select Swap Main and Secondary Inputs.

• To adjust the gamma settings for the secondary input select Secondary Image Settings.

See Adjust Gamma Settings on page 45.

ArrayLOC is enabled by default.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 79 80

Sem comentários

Christie Mirage WQ-L Manual do Utilizador Página 39