Christie CC70 Manual do Operador descarregar pdf (Página 29)

SLC Series Xenon Console

7-2 CHRISTIE INCORPORATED

February, 1999

WARNING

Always remove the lamp before cleaning the reflector.

7.2.1. CLEANING DUST

For surfaces that are dusty but do not have smudges, fingerprints, or grease marks:

1. Brush dust from surface with camel-hair brush.

2. Blow remaining dust away with compressed air.

7.2.2. CLEANING GREASE

For surfaces that are smudged or have oil or grease smears:

1. Moisten cotton pad with light detergent solution. Pad should be well moistened but not

dripping wet.

2. Gently swab exposed lens or mirror surface, using spiral motion and working from center

outward toward edge of surface.

3. Sponge up moisture with cheesecloth or lens tissue.

Always sponge with fresh cheesecloth or lens tissue. Do not wipe with

material that has been used before. Throw cheesecloth or lens tissue away

after one use.

4. Dampen cotton pad with methyl alcohol. Wipe surface, using spiral motion from center

to edge, in one continuous motion.

5. Dry exposed surface with dry cotton pad or with lens tissue.

6. Repeat procedure above as required.

7. When exposed lens or mirror surface is dry and clean, loosen any remaining lint with

brush and blow clean with compressed air.

7.3. MAINTAINING OTHER SURFACES

Surfaces other than the optical surfaces require periodic maintenance to keep the lamphouse

in good operating condition. These items are:

• Blower

• Igniter

• Air flow interlocks.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Sem comentários

Christie CC70 Manual do Operador Página 29