Christie Roadie HD+35K Guia de Configuração descarregar pdf (Página 45)

Section 4: Troubleshooting

Roadie HD+35K Setup Guide 4-5

020-100394-06 Rev. 1 (10-2013)

4.5.13Colors in the Display are Inaccurate

The color, tint, color space and/or color temperature settings may require adjustment at your input source, or in

the projector.

4.5.14Display is Not Rectangular

Check the following:

• Check leveling of the projector.

• Ensure the lens surface and screen are parallel to one another.

• Ensure the keystone setting is properly set.

4.5.15Display is “Noisy”

Check the following:

• Display adjustment at the input source may be required. Adjust pixel tracking, phase and filter. Noise is

particularly common on YPbPr signals from a DVD player.

• Ensure the video input is terminated (

75 ). If it is the last connection in a loop-through chain, the video

input should be terminated at the last source input only.

• The input signal and/or signal cables carrying the input signal may be of poor quality.

• If the distance between the input source device and the projector is greater than 25 feet, signal amplification/

conditioning may be required.

• If the source is a VCR or off-air broadcast, detail may be set too high.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Sem comentários

Christie Roadie HD+35K Guia de Configuração Página 45