Christie Roadie HD+35K Guia de Configuração descarregar pdf (Página 36)

3-2 Roadie HD+35K Setup Guide

020-100394-06 Rev. 1 (10-2013)

Section 3: Operation

For China models, the projector breaker on the projector head rear panel serves two purposes:

1. It is a breaker/power switch for the Roadie HD+35K projector head.

2. It protects against over-current conditions of 10A or more.

The breakers/power switches must be ON in order to enable normal Roadie HD+35K system power-up and

operation. If faulty or major excessive AC is detected, the breakers “trip” to OFF in order to prevent damage.

Try switching the breakers/power switches ON again. If the breakers/power switches continues to trip OFF,

this indicates a major fault, and the AC problem must be resolved. Possible causes might include shorts,

damage to lamp cables, or very excessive AC.

NOTE: You must press POWER on the built-in keypad as the breaker/power switch do not power up the

projector or start the lamp.

The internal ballast fan indicates whether or not both (Main and Lamp) breakers/power switches are ON. There

is no other indicator. When the main ballast breaker is ON, lights on the ballast indicate only that the ballast is

plugged in.

3.1.3 Control Panel (Rear of Projector)

The rear control panel includes the built-in keypad, IR sensor, 2-digit status/error code display window, and the

LCD status display, as described in Table 3.1.

Table 3.1 Rear Projector Control Panel

CONTROL PANEL AREA DESCRIPTION

Built-In Keypad

PROVIDES ACCESS TO ALL SOFTWARE CONTROLS NEEDED FOR WORKING WITH THE

PROJECTOR. FOR MORE CONVENIENT FUNCTIONALITY, YOU CAN USE A REMOTE, WEB

BROWSER, OR A SERIAL MESSAGE-BASED METHOD OF CONTROL.

IR Sensor

SENSORS AT THE FRONT AND REAR OF THE PROJECTOR DETECT COMMANDS FROM

THE STANDARD IR REMOTE.

Two-Digit Status/Error Code

Window

THE CODE THAT DISPLAYS IN THIS WINDOW INDICATES THE BASIC OPERATIONAL

STATE OF THE PROJECTOR. EACH CODE REFERENCES ITS CORRESPONDING STATUS/

ERROR MESSAGE AND DISPLAYS IT IN THE LCD Status Display WINDOW.

SEE Section 3.4.1 System Warnings/Errors.

LCD Status Display

FULL STATUS AND ERROR MESSAGES APPEAR IN THIS WINDOW.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

Sem comentários

Christie Roadie HD+35K Guia de Configuração Página 36