Christie J series 2.4kW Guia de Configuração descarregar pdf (Página 20)

2-10 J Series 2.0, 2.4, and 3.0 kW Setup Guide

020-100751-01 Rev. 1 (10-2011)

Section 2: Installation and Setup

11. Lock the setscrews, and re-check the boresight quality. Tighten the setscrew enough to ensure they will not

shift.

FIGURE 2-13

2.2.4 Powering Down

FIGURE 2-14 POWERING DOWN/WEB USER INTERFACE

The projector can be powered down by using one of

the following methods:

Remote Keypad/Built-In Keypad

• Press and hold P

OWER

• Press P

OWER twice

• Press P

OWER once, then immediately press the

DOWN key.

NOTE: For Step 2 and 3, if the

second key is not pressed immediately, a

confirmation window will appear. The second key

press must be pressed within 1 second of the window appearing.

NOTE: After powering down, the Status LEDs cycle and the LCD displays the message “Cooling Down”, until

cool down is complete.

Web User Interface (UI)

1. From the Main Tab, Select Power>OFF.

NOTE: A window will display for confirmation on powering

down, see Figure 2-14.

2. Select Yes.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Sem comentários

Christie J series 2.4kW Guia de Configuração Página 20