
Section 6: Specifications
6-2 CP2000-X SETUP GUIDE
020-100059-01 Rev 1. (03/08)
Number of inputs 2
Standard supported SMPTE 292M bit-serial
Connector Type BNC
* NOTE: Currently supported cinema formats are listed on page 4-2.
Number of inputs 2
Standard supported VESA Digital Visual Interface (DVI-D)
Connector Type 24-pin female DVI-D
* NOTE: Currently supported DVI formats (i.e., non-cinema formats) are listed on page 5-2.
RS-232 connectors (2): 9-pin D female A= Non-ASCII PC communication
B=Christie-proprietary accessories only
Ethernet connectors (2): RJ-45 female Std. 100 base-TX, 100 Mbps max.
GPIO connector (1): 37-pin D female Refer to Figure C.1 and Figure C.2
TPC connector ((1): 6-pin XLR See Touch Panel Controller, below.
Ballast Control Port (1): 9-pin D male RS-232, w/proprietary protocol
(for ballast only)
Ballast Interlock Port (1): 9-pin D female
(for ballast only)
+5V TTL-compatible, opto-isolated at
ballast end.
Type of Display 5.7” diagonal color LCD, backlit
Integrated Operating System
Microsoft Windows
®
CE
Communication Interface w/CP 10BaseT Ethernet
Power Requirement .05 A max., at 24 VDC ±10%
Current Rating 2.0 A max.
Interface Connector 8-pin DIN, bayonet-locking
Memory 64MB
Projection head
Projection Compartment AC (near Panel B, at front)
Connector type & rating (1) IEC 320-compatible, 10 A rating
Voltage range, nominal 200 – 240 VAC ±10%
Line frequency, nominal 50 – 60 Hz
AC input rating 10 A
Max. inrush current
* 35 A
Max. current consumption* 3 A
Max. power consumption* 700 W
Lamp (DC)
Max. operating voltage 46 VDC
Max. start-up voltage 155 VDC
Max. current consumption 180 A
Max. power consumption 6600 W
Connector type Female CAM Lock receptacle (+red)
Male CAM Lock receptacle (–black)
* With extractor
Cinema In
uts h
Non-cinema DVI Inputs
h
(FOR ALTERNATIVE CONTENT)
Control Ports h
Touch Panel Controlle
h
Power Specifications h
Comentários a estes Manuais