Christie 1920-DX Manual de Serviço

LIT TECH REF TIPM Serial Command 1 of 87020-100291-03 Rev. 1 (03-2010) TIPM Serial CommandsTechnical Reference Information1OVERVIEWThis document descr

10 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)2.8 NETWORK OPERATIONUp to 1000 projectors can be linked together in a chain wi

LIT TECH REF TIPM Serial Command 11 of 87020-100291-03 Rev. 1 (03-2010)SUMMARY LIST OF SERIAL COMMANDS (ACE) Auto Color Enable (BRU) Brightness Unifo

12 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010) (HDC) DHDM Configuration (LPC) Lamp Changed (PBW) PIP Border Width (HIS) Lam

LIT TECH REF TIPM Serial Command 13 of 87020-100291-03 Rev. 1 (03-2010) (ROO) Red Odd Pixel Offset (SZP) Size Presets Position (VRT) Vertical Positi

14 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)DETAILED SERIAL COMMAND DESCRIPTIONS(ACE) AUTO COLOR ENABLE DESCRIPTIONUse to a

LIT TECH REF TIPM Serial Command 15 of 87020-100291-03 Rev. 1 (03-2010)(ALC) AUTOMATIC LENS CALIBRATIONDESCRIPTIONAutomatic Lens Calibrationis used in

16 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(APW) AUTO POWER UP DESCRIPTIONSet to automatically power up (1) or remain off

LIT TECH REF TIPM Serial Command 17 of 87020-100291-03 Rev. 1 (03-2010)(ASU) AUTO SETUP DESCRIPTIONThis control tells the projector to automatically a

18 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(BDS) BAUD RATESDESCRIPTIONSet the baud rate for a serial communications port.

LIT TECH REF TIPM Serial Command 19 of 87020-100291-03 Rev. 1 (03-2010)(BKY) Broadcast Keys con’tEXAMPLES:(BKY 1) - Enable Broadcast Key. (BKY 0) - Di

2 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)NOTES: 1) Refer to the User’s Manual provided with the projector for all cable r

20 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(BRM) BRIGHTNESS MATCHINGCONTROL GROUP: Option SUBCLASS: Power Up

LIT TECH REF TIPM Serial Command 21 of 87020-100291-03 Rev. 1 (03-2010)(BRU) Brightness Uniformity con’tP2 Which color to adjust.0 or R = Red1 or G

22 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(BUS) BRIGHTNESS UNIFORMITY SELECTDESCRIPTIONEnables/Disables brightness unifor

LIT TECH REF TIPM Serial Command 23 of 87020-100291-03 Rev. 1 (03-2010)(CCA) Comprehensive Color Adjustment con’tP12 Cyan xP13 Cyan yP14 Yellow xP15

24 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(CHA) CHANNEL SELECTDESCRIPTIONSelect the channel to use, in the range 1-50. Ma

LIT TECH REF TIPM Serial Command 25 of 87020-100291-03 Rev. 1 (03-2010)(CON) CONTRAST DESCRIPTIONThis control sets the image contrast level (0 - 1000)

26 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(CWS) 2ND COLOR WHEEL DELAYDESCRIPTIONFor DS+60 and Matrix 3000 (single-chip pr

LIT TECH REF TIPM Serial Command 27 of 87020-100291-03 Rev. 1 (03-2010)(DRK) DARK INTERVALDESCRIPTIONControl the time interval—in active output lines—

28 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(DTA) Source Data con’tP6 Input polarity & routingBits 2 - 0//horizontal sy

LIT TECH REF TIPM Serial Command 29 of 87020-100291-03 Rev. 1 (03-2010)(DTA) Source Data con’tEXAMPLES:DOWNLOADING SOURCE SETUP SETTINGS (DATA) TO A P

LIT TECH REF TIPM Serial Command 3 of 87020-100291-03 Rev. 1 (03-2010)OTHER SPECIAL FUNCTIONS (OPTIONAL): To add functionality to the current message,

30 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(EBB) Edge Blending Black Levels con’tPARAMETERP1DESCRIPTION OF USEVal u e: 1

LIT TECH REF TIPM Serial Command 31 of 87020-100291-03 Rev. 1 (03-2010)(EBL) EDGE BLENDING DESCRIPTIONNOTE: In v1.0 software, Edge Blending can only b

32 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(EBS) EDGE BLENDING SELECTDESCRIPTIONThis enables (1) or disables (0) edge ble

LIT TECH REF TIPM Serial Command 33 of 87020-100291-03 Rev. 1 (03-2010)(ERR) ERROR MESSAGEDESCRIPTIONThe projector broadcasts an ERR message when an e

34 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(FAD) Fade Time con’tEXAMPLE:(FAD 100) - Fade for 1 second. (FCS) FOCUS DESCRIP

LIT TECH REF TIPM Serial Command 35 of 87020-100291-03 Rev. 1 (03-2010)(FIL) Input Filter con’tEXAMPLES:(FIL 2) - Set the filter to HDTV. (FIN) FLOATI

36 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(FRD) FRAME DELAY DESCRIPTIONDelays the output signal timing relative to the in

LIT TECH REF TIPM Serial Command 37 of 87020-100291-03 Rev. 1 (03-2010)(FYI) For Your Information con’tSTATUS CODENEW STATE (P1) MEANING AND ADDITIONA

38 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(FYI) For Your Information con’tEXAMPLES:(00030FYI 001 000 "POWERED OFF&qu

LIT TECH REF TIPM Serial Command 39 of 87020-100291-03 Rev. 1 (03-2010)(GIO) General Input/Output con’tEXAMPLES:Set the Direction(GIO?) // Request st

4 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)2.2 SAMPLE MESSAGES AND THEIR MEANINGDESIRED ACTION MESSAGE DESCRIPTIONGet curre

40 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(GOG) Green Odd Gain con’tEXAMPLES:(GOG 130 135) - Sets the BNC analog path to

LIT TECH REF TIPM Serial Command 41 of 87020-100291-03 Rev. 1 (03-2010)(HDL) DHDM LOOP THRU SETTINGDESCRIPTIONWhen the Dual SD/HD-SDI module is presen

42 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(HLP) HELP DESCRIPTIONUse HLP for a list of all serial commands supported in yo

LIT TECH REF TIPM Serial Command 43 of 87020-100291-03 Rev. 1 (03-2010)(INM) IN MENU DESCRIPTIONUse INM to specify whether a source setup is to be inc

44 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(ITP) INTERNAL TEST PATTERN DESCRIPTIONUse ITP to display an internal test patt

LIT TECH REF TIPM Serial Command 45 of 87020-100291-03 Rev. 1 (03-2010)(KEN) Keypad Enable con’tP2 0 = Off1 = Responds to any protocol10 = Protocol A1

46 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(KEY) Key Code con’tEXAMPLES:(KEY 044) - Send code for the MENU keypad command.

LIT TECH REF TIPM Serial Command 47 of 87020-100291-03 Rev. 1 (03-2010)(LCB) Lens Calibrate con’tDESCRIPTIONCalibration of the lens can be executed in

48 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LCN) LENS CENTER DESCRIPTIONThis command will move each of the lens motors to

LIT TECH REF TIPM Serial Command 49 of 87020-100291-03 Rev. 1 (03-2010)(LDM) Lens Direct Motion con’tWhen using tracking mode, the sensitivity of the

LIT TECH REF TIPM Serial Command 5 of 87020-100291-03 Rev. 1 (03-2010)2.3 WHAT IS ACTUALLY SENT IN A MESSAGE?Although you will send and read messages

50 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LDM) Lens Direct Motion con’tParameters:NOTE: YOU MUST FIRST ENSURE THAT CALIB

LIT TECH REF TIPM Serial Command 51 of 87020-100291-03 Rev. 1 (03-2010)(LDV) LEVEL DETECTOR VALUE DESCRIPTIONUse an LDV setting of 1 to 1023 when the

52 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LLM) LAMPLOC MODULEDESCRIPTIONThis command groups a number of commands related

LIT TECH REF TIPM Serial Command 53 of 87020-100291-03 Rev. 1 (03-2010)(LOP) Lamp Operation con’tPARAMETER<No Parameter>DESCRIPTION OF USE1 = La

54 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LPL) LAMP LIMITDESCRIPTIONUse LPL to specify the number of hours the lamp can

LIT TECH REF TIPM Serial Command 55 of 87020-100291-03 Rev. 1 (03-2010)(LPS) Lamp Status con’tP2 0 = Good1 = Assiciated Fan Failure2 = Lamp Failed to

56 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LST) Lamp Statistics con’tThe current lamp record is allowed to make free use

LIT TECH REF TIPM Serial Command 57 of 87020-100291-03 Rev. 1 (03-2010)(LST) Lamp Statistics con’t NOTE: Highlighted commands are primarily i

58 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(LST) Lamp Statistics con’tForce a standard record to be installed, largely for

LIT TECH REF TIPM Serial Command 59 of 87020-100291-03 Rev. 1 (03-2010)(LST) Lamp Statistics con’tList type 3 data for lamp 2 starting at the 2nd reco

6 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)NOTES: 1) ‘h’ indicates a hex number. 2) If a “request” message has a checksum s

60 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(MNU) Menu Status con’tPARAMETERP1DESCRIPTION OF USE0 = presentation level1 = m

LIT TECH REF TIPM Serial Command 61 of 87020-100291-03 Rev. 1 (03-2010)(MSP) MENU LOCATION DESCRIPTIONSet the default menu position on the screen. PAR

62 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(NSI) NUMBER SELECT IMAGEDESCRIPTIONUse NSI to use the numeric keys 1-8 as inpu

LIT TECH REF TIPM Serial Command 63 of 87020-100291-03 Rev. 1 (03-2010)(OTF) OUTPUT FORMATDESCRIPTIONChange output format for Cine-IPM 2K.NOTE: DVI-1

64 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(PBC) PIP BORDER COLOR DESCRIPTIONThis control lets you choose the color of the

LIT TECH REF TIPM Serial Command 65 of 87020-100291-03 Rev. 1 (03-2010)(PHP) PIP HORIZONTAL POSITION DESCRIPTIONSet the horizontal position (0-100) of

66 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(PLK) Parameter Lockout con’tEXAMPLE:(PLK “CON” 1) - Lock the “contrast” contro

LIT TECH REF TIPM Serial Command 67 of 87020-100291-03 Rev. 1 (03-2010)(PNG) Ping con’tP4 = Maintenance version# with no functional change (a-z)P5 = B

68 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(PSW) ALTERNATIVE SERVICE PASSWORDDESCRIPTIONUse PSW to find out the most recen

LIT TECH REF TIPM Serial Command 69 of 87020-100291-03 Rev. 1 (03-2010)(PWR) Power con’tDESCRIPTIONDLVOnly values of 0, 1 or 2 as the first paramete

LIT TECH REF TIPM Serial Command 7 of 87020-100291-03 Rev. 1 (03-2010)Note that in these projectors, auto mode is supported only for selecting a video

70 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(PXP) PIXEL PHASE DESCRIPTIONUse PXP to adjust the position of the sampling clo

LIT TECH REF TIPM Serial Command 71 of 87020-100291-03 Rev. 1 (03-2010)(REM) REMOTE COMMANDSDESCRIPTIONAllows arbitrary serial data to be sent out a s

72 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(ROG) RED ODD GAIN DESCRIPTIONSet or request the red Odd Gain (0-255) for a spe

LIT TECH REF TIPM Serial Command 73 of 87020-100291-03 Rev. 1 (03-2010)(RTE) Real Time Events con’tIF P1 = T OR T DESCRIPTION MEANINGP1 = T or t Timed

74 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(RTE) Real Time Events con’tIF P1 = S OR S DESCRIPTION MEANINGP1 = S or s Syste

LIT TECH REF TIPM Serial Command 75 of 87020-100291-03 Rev. 1 (03-2010)(RTE) Real Time Events con’tEXAMPLES:(RTE g 7 H “(GIO 22 P 100)”)(RTE g 7 H “(G

76 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(SDE) SOURCE DIALOG ENABLEDESCRIPTIONUse SDE to show (1) or hide (0) the on-scr

LIT TECH REF TIPM Serial Command 77 of 87020-100291-03 Rev. 1 (03-2010)(SOR) SCREEN ORIENTATION DESCRIPTIONSelects the orientation of the displayed im

78 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(SST) System Status con’t(SST? X) where X = which Status Group 0-4 (P1). This r

LIT TECH REF TIPM Serial Command 79 of 87020-100291-03 Rev. 1 (03-2010)(SZP) Size Presets Position con’tPARAMETER<No Parameter>DESCRIPTION OF US

8 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)The end of the list is marked with P1=111. You can also access the text for a sp

80 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(TDI) 3D STEREO SYNC INPUTDESCRIPTIONNOTE: For Mirage HD only.Select source for

LIT TECH REF TIPM Serial Command 81 of 87020-100291-03 Rev. 1 (03-2010)(TDO) 3D Stereo Sync Output con’tPARAMETER<No Parameter>DESCRIPTION OF US

82 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(USR) USER MESSAGEDESCRIPTIONUse USR to load a user message for display in the

LIT TECH REF TIPM Serial Command 83 of 87020-100291-03 Rev. 1 (03-2010)(VRT) VERTICAL POSITION DESCRIPTIONThis control sets the vertical position of t

84 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(WKC) 2D KEYSTONE CORNERSDESCRIPTIONNOTE: Requires Christie TWIST™ module.Use W

LIT TECH REF TIPM Serial Command 85 of 87020-100291-03 Rev. 1 (03-2010)(WSH) WARP SHARPNESSDESCRIPTIONSet or request the warp sharpness.PARAMETER<

86 of 87 LIT TECH REF TIPM Serial Command020-100291-03 Rev. 1 (03-2010)(XAR) XPort ArtNet Settings con’tThe following table indicates how individual p

LIT TECH REF TIPM Serial Command 87 of 87020-100291-03 Rev. 1 (03-2010)(ZOM) ZOOMDESCRIPTIONChange the zoom setting of the lens under motor control.No

LIT TECH REF TIPM Serial Command 9 of 87020-100291-03 Rev. 1 (03-2010)ENABLE INQUIRY: Add the letter “E” in your request message to find out if the co